Chapter 117: 115: OK, this matter is settled, I will help you (6K)

The person above!

Hu Lai immediately thought of polymer materials.

Nowadays, only polymer materials are worthy of attention from the Phoenix Factory.

Hu Lai didn't dare to neglect, so he quickly packed up his clothes and walked quickly to the factory with Director Zhang.

As soon as he walked into the factory, Hu Lai saw two people standing outside the polymer materials factory at a glance. One of them pointed at the factory and kept introducing them. Not far away, there were about a dozen staff members who were on standby at any time.

"It's really for polymer materials!"

Hu Lai immediately confirmed that the people above were too pragmatic and came to the factory directly as soon as he arrived at the factory.

He thought to himself, his feet kept stopping.

When he got closer, Hu Lai realized that the person who introduced the man outside the factory was Dr. Huang Yi!

Hu Lai felt a little relaxed, but he was even more curious about who the person next to him was able to accompany Dr. Huang Yi himself!

He walked quickly to the front, and Huang Yi saw Hu Lai at this time and greeted him with a smile.

"Mr. Hu, we're meeting again!"

Hu Lai smiled and shook his hands politely.

After the two of them greeted each other, Huang Yi introduced him enthusiastically.

"Director Li, this is the boss of Phoenix Factory. Hu Lai. Last time I came to get the materials, I cooperated with our work very well."

He looked at Hu Lai again.

"This is our Director Li and Li Dong, who are the leader of the Import and Export Control Department of the Ministry of Industry."

"This time I came here specifically for your polymer materials."

"I'll come to the factory and check it out at your production plant right away."

Import and Export Control Department of the Ministry of Industry!

Are polymer materials going to be exported?

This really attracted the attention of the above!

Generally speaking, any country encourages export of products.

Unexpectedly, polymer materials will also be controlled.

I dare not neglect it.

"Hello, Director Li."

Li Dong in front of him looked about fifty years old, with sharp eyes, looking very energetic and imposing.

However, Director Li was very polite. After a few polite words, Hu Lai invited the two to the reception room.

The group of four came to the reception room, and Director Zhang was busy making tea.

The few people didn't say nonsense and went straight to the topic.

Huang Yi first took out a thick sealed file bag from his bag and handed it to Hu Lai.

"Mr. Hu, these are the laboratory detailed data of the MQ1 polymer material you provide."

"The many characteristics of polymer materials are somewhat beyond our expectations!"

Hu Lai took the file bag and listened to Huang Yi continue to say:

“As originally thought, spray materials can make the spray objects stronger.”

"But after testing hundreds of materials, we found that the greater the rigidity, the smaller the effect after spraying."

"Especially after reaching the level of HSLA alloy steel, the lifting effect is minimal."

Hu Lai knew this after establishing a polymer materials laboratory.

After the resin sprays polymer materials with "Nirvana" bicycles, the rigidity of high-carbon steel can be achieved.

After spraying polymer materials on high-carbon steel body, the improvement effect is not as large as that of resin materials.

It seems that the better the material is, the smaller the improvement effect.

“There are also restrictions on the use scenarios of MQ1 polymer materials.”

"We passed the wind tunnel test and the objects sprayed with polymer materials will become abnormally unstable at high pressure and high speeds, and the coating molecules will fall off."

"And, the high-temperature performance of polymer materials is not good. After 30 seconds, the molecular structure will become unstable and cause combustion."

I am a professional, and the test was very detailed.

Hu Lai thought about it and immediately reacted.

It will become unstable under high speed and high pressure, which means there is absolutely no chance in the aerospace field.

Their high temperature resistance will also greatly limit the application of polymer materials in certain key areas.

Just this, can export be restricted?

Hu Lai was confused, but Huang Yi smiled instead.

"Although the limiting performance of polymer materials is not very good, we found a good characteristic in our tests."

“Correct resistant!”

He smiled mysteriously and his voice was deliberately lowered. Just as he was about to speak, Li Dong, who had not moved, coughed.

Huang Yi smiled awkwardly, and Li Dong looked at Hu Lai and Director Zhang with a serious expression.

"The necessary procedures must be informed first. The following content is confidential and cannot be transmitted outside."

Hu Lai's expression became tight. As soon as Director Zhang picked up the teacup, his hands trembled, but his heart was faintly excited.

I'll wipe it!

Confidential content, state secret!

Phoenix Factory has become a confidentiality department!

Li Dong's deep voice came:

"After testing, we found that your polymer spray material has excellent weight loss effect."

"And the surface of the object after spraying will be chemically inert, and the coating surface will be accompanied by no aquatic organisms, which is very friendly to our ocean-going ships!"

"The most important thing is that your polymer spray material will form a polymer layer on the surface of the object after spraying, which has extremely high corrosion resistance and fatigue resistance."

“We are testing for large ocean-going ship manufacturing.”

It has extremely high corrosion resistance and no aquatic organisms to accompany it!

As soon as these two items were spoken out, Hu Lai's heart kept beating and Director Zhang was even more stunned.

I won’t say that there is no aquatic organisms attached to it.

If a large ship stays in the sea 24 hours a day, there will inevitably be a large number of undersea creatures attached to the bottom of the ship, which not only increases the weight of the ship, but also has safety hazards to the hull.

Nowadays, spraying materials can completely solve this problem!

When designing and manufacturing large ships, an important issue is corrosion protection!

Li Dongdu personally said that the corrosion resistance is extremely high, which is obviously better than the many anti-corrosion materials at present!

The most important thing is that this is the spray material!

Convenient, simple and practical.

The original materials don’t need to be changed, just spray them on. How simple!

In addition to the characteristics of the spray material itself, it is possible to spray polymer materials directly with lightweight materials in certain places where high strength does not require high strength, so as to achieve the strength of high-carbon steel!

The hull mass is significantly reduced!

Needless to say, the hull weight reduction is good. Even for civilian use, it can save fuel and increase the speed of the ship. If used on an aircraft carrier...

Director Li Dong said that it is being tested and applied to large ocean-going ships, even if it is not 055.

Hu Lai suddenly understood and figured it out. No wonder he would restrict his exports!

The weight loss and corrosion resistance of large ships have always been the key issues in ship manufacturing.

Director Li Dong's voice continued:

"We have arranged personnel to conduct more detailed ship tests. If there is no problem, there will be someone to discuss the procurement agreement with you."

"And this time we came to inform us of the decisions above and listen to your company's demands."

He looked at Hu Lai, his tone was slow:

"We will not restrict you from using spray materials for civilian finished products!"

"Because we have tested it, once the spray coating solidifies and then finishes the spray coating, it will damage the molecular structure."

"But for polymer materials themselves, we need to implement export controls and cannot be exported to the outside world for the time being. Domestic enterprise procurement also needs to be reported and reviewed in advance."
To be continued...