Chapter 54 Evaluation
"Hello, everyone, who am I?
As we all know, as a public, objective, and third-party evaluation agency, we have already reviewed many products.
Today, we will get started with the second generation of Wanhu mobile phones as soon as possible.
Speaking of this second-generation mobile phone in Wanhu, everyone may know that I am a senior mobile phone in Wanhu.
I had already purchased the Wanhu Generation when it was just released, and it has been thirteen months since then.
During these thirteen months, although Wanhu Mobile has encountered many challenges, it still remains in an absolute leading position.
Three days ago, Wanhu held a press conference and launched Wanhu's second-generation mobile phone.
They declared that this is a revolutionary product, so now we can see where it is more revolutionary.
First, let’s take a look at this mobile phone box.
Many people think this mobile phone box is very simple, right?
When I first got it, I also thought the carton was a bit rough.
However, after I got to know the engineers from Wanhu.
I only realized that their mobile phone outer box uses environmentally friendly materials.
Let's give a close-up shot.
We can see rice husk-like things on this rough edge.
That's right, the paper in this outer box is made of rice husks and straw.
Original, no bleaching or fluorescent agents are used.
According to the engineers of Wanhu, the energy consumed, the pollution and carbon emissions caused are 30%, fifty and sixty percent lower than those of traditional boxes.
OK, let's open the outer box.
The outer box is divided into three layers. The first layer is the mobile phone, the second layer is the manual and warranty card, and the third layer is the charger, charging cable, and headphones.
Let's take a look at the instruction manual first.
This time, the configuration of the second generation of Wanhu has been greatly improved compared with the first generation.
First of all, the processing power of mobile phones has been 50% higher than the previous generation.
Secondly, the ratio of the scale has increased by 30% compared to the previous generation. At the press conference, I also said that when the distance between the mobile phone is about fifty centimeters, the naked eye cannot tell the pixel point.
Later, we will compare the screen with Nintendo’s game console and Wanhu Generation.
The accessories are basically the same as the first generation.
But the headphones are slightly different.
It is said that a better sound unit was used, and the mold of the entire headphone was also adjusted.
The outlines of the ears of 36,000 volunteers were collected and the appearance appeared in such a shape.
Everyone has encountered the experience of wearing this type of in-ear headphones and making your ears hurt.
Although due to individual reasons, tens of thousands of households cannot completely eliminate the possibility of ear pain in every person. However, the probability of ear pain has also decreased by about 20%.
Okay, let's take a look at the main body of the phone.
There is a layer of plastic film on the screen of the phone.
Some people may say, aren’t Wanhu promoting environmental protection?
Why do you still use this plastic film on your mobile phone screen?
The reason is that mobile phone assembly is a complicated process.
If the screen is protected during assembly, many minor flaws will appear on the screen.
In order to avoid these defects, Wanhu covered the mobile phone screen with plastic film.
OK, let's tear the membrane open now.
This layer of film is electrostatically adsorbed, and there will be no glue residue when tear off.
We can see that the screen of Wanhu Second Generation seems to be very dark.
Let’s compare with the Wanhu Generation.
Why is this?
This has to talk about the technology used by Wanhu mobile phones.
Wanhu’s mobile phones all use hard screen design.
For example, traditional resistive screens or LCD screens are all soft screens.
Wanhu's hard screen is covered with a layer of glass on the screen.
In the past, there was air between the glass and the screen.
This is what everyone sees in the Wanhu Generation. Because the air transmittance is not very good, it looks gray.
The second generation of Wanhu used full-fitting technology, with a light transmittance of up to 93.7%, which looked very dark.
It is said that this technology was first invented and patented by tens of thousands of households.
I want to go, in the days to come, we may be able to know whether the phone is the latest and most advanced phone by looking at whether the screen of a phone is black or gray.
OK, now let's continue to look at the appearance.
On the left side of the phone are the volume and mute buttons, and on and off buttons are the right side.
On the left side of the bottom is the speaker, in the middle is the charging port, and on the right is the microphone and the three-point five-headphone port.
Let’s look at the top again. It seems that there is only one mobile phone card slot?
No!
I don't know if you are paying attention, there is a small opening here.
This opening is the second microphone.
Some people may ask, is it not possible to have a microphone underneath, why is there still a top?
Very simple.
The one below is the main microphone, and the one above is the auxiliary microphone.
Through these two microphones, coupled with Wanhu's software training, the microphone noise reduction function is realized.
What is the use of this function?
The function of this function is that when everyone is noisy, it used to be difficult for the caller to hear clearly what we were talking about.
However, now we can use this technology to reduce the impact of surrounding noise on calls.
Later, we will release the noise comparison between the first generation of users, the second generation of users, and Motorola mobile phones in noisy environments.
OK, now we turn to the back of the phone.
This place is the place that many people pay the most attention to.
It is also the biggest difference between Wanhu's first generation and Wanhu's second generation with the naked eye.
Except for the camera, there is a small opening on the back, everything else is covered with glass.
We don’t know if this glass will scratch in daily use, but when we first started, the round and cold feeling of this glass was really great.
I feel like my hands are in love with this feeling.
It is said that the front and rear glasses are made of glass produced by Chinese special glass factories.
Unfortunately, Corning Glass, which was adopted by the previous generation, was eliminated this time.
It is said that this is because Corning's glass is too thick and has not completed the drop test.
Now I'm going to cross my phone like this, you can clearly see it.
This phone uses a very obvious sandwich structure.
The upper, middle and lower layers are screen glass, metal middle frame, and back cover glass.
The middle frame is slightly protruding, which is said to protect the front and rear glass.
Originally I thought it would affect the feel, but when I got the real machine, I found that the medium metal model had undergone three CNC precision chamfering processing. When I was handheld, I would not feel like cutting my hands.
Chapter completed!